Overview
This guide explains the recommended capture settings and file requirements when using Insta360 cameras for 360° photogrammetry processing in Prevu3D.
Supported Cameras
The following Insta360 models are validated for use:
Insta360 ONE X2
Insta360 X3
Insta360 X4
Insta360 X5
Camera Setup
Before starting capture:
Update the camera firmware to the latest version
Remove lens caps
Remove lens guards unless required by the manufacturer
Clean both lenses using a microfiber cloth
Ensure sufficient battery and storage space
Recommended Recording Settings
Use the following configuration for all supported Insta360 models.
Setting | Value |
|---|---|
Shooting Mode | Timelapse 360 |
Resolution | 5.7K |
Frame Rate | 30 fps |
Interval | 0.5 seconds |
Using different settings may result in processing failures or poor reconstruction quality.
Mounting Recommendations
Selfie Stick
A selfie stick is the recommended mounting option.
Advantages:
Better stability
Easier height control
Keeps the operator in the camera blind spot
Recommended option:
Insta360 Carbon Fiber Selfie Stick
File Requirements
Upload raw files directly from the camera.
Supported file formats:
.insv.mp4
Do not:
Edit the video
Convert the format
Re-encode the files
Important
Uploading modified files may prevent successful processing.
Video Duration Limits
Maximum video length:
15 minutes
For large environments, capture multiple recordings.